Download Article

Download Article

Concrete siding has been in utilize since Roman times as a durable way to cover homes. It is over again rising in popularity because it does not warp or buckle and it is resistant to burn and insects. If you lot have a concrete home or physical siding, you lot should pigment information technology fairly quickly after installation. Concrete siding is a blended material fabricated out of a type of cement, an aggregate similar sand or gravel and a mix of water and chemicals. Types of concrete siding include cobweb-cement, Hardie-board, cement and stucco. A well-executed paint job tin can last 7 to 25 years, depending upon the blazon of siding you take. Read more than to learn how to pigment concrete siding.

Steps

  1. 1

    Read the manufacturer's guidelines for painting your siding. More often than not, they recommend that y'all paint cobweb-cement siding within 90 days of installation, then that it adheres properly before being exposed to all weather conditions. Physical siding differs greatly depending upon the blended mix, so follow these instructions as closely as possible.

  2. two

    Cheque whether your siding is united nations-primed (raw) or pre-primed. If it is un-primed, you lot will need to buy and use a primer over all surfaces of the siding. If it is pre-primed, you tin skip this footstep and go straight to the pigment task.

    Advertizing

  3. 3

    Visit a home comeback store or paint store to become samples of acrylic paint colors for your home. The manufacturer may recommend sure blazon of pigment. The store may be able to give recommendations as well.

  4. 4

    Purchase an acrylic primer, acrylic paint and either an acrylic or oil-based topcoat. Bring house and siding measurements to the store where you lot program to buy the paint then that they can assist you to calculate how much paint, primer and topcoat are needed. The following are good tips for paint shopping:

    • Flat paint is more than probable to gather grit and mildew.
    • Satin topcoats may look blotchy compared to other finishes.
    • Paint that contains polyurethane may achieve a more durable and attractive look. It may negate the need for a topcoat too.
  5. 5

    Patch any dents in your surface with a difficult putty and a putty pocketknife. Some places may demand more than 1 coat of putty. Let the putty to dry thoroughly, according to parcel specifications, before moving along to the adjacent steps.

  6. 6

    Clean all surfaces of the concrete siding with a low-pressure spray from a hose and a nylon brush. Make sure to remove all dirt from crevices. Allow the firm and siding to dry for 2 to 4 days before starting to pigment.

  7. vii

    Apply your all-weather condition acrylic primer if the siding is raw or you are repainting. Utilise 1 to two coats, using pigment brushes to ensure you go in all the crevices of the siding. Allow it to dry according to the product'south instructions.

  8. 8

    Use 2 coats of your acrylic latex paint to the surface of your siding. If you started with pre-primed siding, you can become straight to painting afterward the siding is make clean and dry.

  9. nine

    Apply an acrylic or oil-based topcoat if it is recommended by the manufacturer and/or the pigment shop. This may depend upon the paint yous chose and the climate in your area.

  10. ten

    Permit the paint to dry thoroughly and so paint the trim of the firm as needed.

    Advert

Add together New Question

  • Question

    Are there any drawbacks to painting hardy plank siding before installing it?

    Community Answer

    It'd be a waist of time, paint, and money because you have to caulk all joints and edges later installation. Plus,with all the treatment, cutting, drilling, and hammering involved in installing plank siding, you lot'd wish you'd never attempted painting it beforehand.Some plank siding does come from the manufacturer with primer applied at the mill. Most painters recommend primming that expensive stuff anyway.

  • Question

    Why does the paint skin off hardboard within six months?

    Community Answer

    You need to add protective gloss coats over it.

Ask a Question

200 characters left

Include your email accost to get a message when this question is answered.

Submit

Advertisement

  • For especially dingy siding, yous may choose to wash the siding with soap and water. This volition assist to remove layered dirt. Make sure to rinse it thoroughly before painting.

  • If you are concerned about using eco-friendly methods of construction, concrete siding offers a trade-off. In that location is considerable energy used in the making of composite siding; however, the paint lasts approximately twice as long equally on wood siding, because the fabric does not warp and cleft in humidity. At that place is time, material and energy savings in the long term.

  • Wear wearable that can become pigment on it. Painting siding may result in stains and ruined fabric.

Thanks for submitting a tip for review!

Advertizement

  • Be extremely cautious when using ladders to paint siding on a business firm. Brand sure to put all security devices in place before climbing the ladder to work.

Advertisement

Things Y'all'll Need

  • Force per unit area-washer or hose with spray nozzle
  • Paint swatches
  • Acrylic primer (optional)
  • Acrylic paint
  • Acrylic or oil-based topcoat
  • Hard putty
  • Putty knife
  • Nylon brush
  • Paint brushes
  • Ladder

References

Nigh This Article

Thanks to all authors for creating a page that has been read 27,054 times.

Did this article help you?